mco_970
Offline
• • • • •
Upload & Sell: On
|
 p.2 #4 · p.2 #4 · Has anyone replaced Sony A7x LCD? I could use some help | |
I wanted to add to this thread that I ended up buying a small roll of 3M VHB tape from Amazon. It's made for bezels. It is double stick, thin, has a texture almost like putty, and gives some water resistance. It worked GREAT for attaching the bezel to the LCD. The trick was to cut extra thin strips of it, stick the strips to the back of the LCD around the edge, and slightly stretch it while applying so it was even a bit more thin than it already is. It needs to not overhang the edges at all, or the bezel will not fit right (you can pull it up and reapply if needed). I made about 4 attempts before getting it right, then it popped together perfectly. I let it cure overnight under a small stack of books to get even adhesion, and voila, it looks factory perfect.  I have been using it a week or two now and that ended up being the easiest part of the repair.
And if anyone needs some, I'll sell the rest of my roll of it cheap. 
|
Just don't do it. 