Chris Tylko
Offline
• • •
Upload & Sell: Off
|
| p.1 #1 · p.1 #1 · Aletsch Pano in Aluminum "Hanging on the wall" | |
We often use the expression "Hang on the wall" here on this forum, so I thought that in addition to sharing an image I'd actually show you how I had it printed on aluminum as well as showing you, well, that I hung it on a wall 
The panorama (1st image) is a 4 stitch image of the Aletsch glacier shot from the Jungfrau this past May (with my brand new 5D MIII). Its a simple automatic PS5 automatic stitch (which actually came out surprisingly well). I provided the printer with a 750 MB, 400 DPI image file to produce a 22" x 60" panel.
The second image is a photograph of the finished print. I shot it quickly so the light on the panel isn't quite even; the aluminum reflects light sources adding to the difficulty.
The third image is a closeup to show the effect. Its really quite neat. I think the process works best for more monochromatic images. I saw a sample of more colorful image and I didn't find it as appealing.
The remaining image is to prove that I did "hang it on the wall" ...seriously, this type of finish does not lend itself to every household or office setting. As you can see, this was for our stainless steel appliance'd kitchen so it works rather well. Its a "modern" look.
Finally, I'm pretty sure its an ink-jet process and it cost me a little over $300. The aluminum sheet is laminated to what looks like a plexi or plastic and is about 4mm thick; there's a wood frame on the back to make it look like its floating.
Hope you enjoy!
No. 1 - Original panorama
No. 2 - Picture of alumimum panel
No. 3 - Close up of panel
No. 4 - Hanging on the wall!
|
It looks great on the wall by the way.