Bogen Nano Clamp size?

FM Forums \| General Gear-talk \| Join Upload & Sell	Search Used
end

Archive 2008 · Bogen Nano Clamp size?

MichaelKirk
Offline
Upload & Sell: Off

p.1 #1 · Bogen Nano Clamp size?

Anyone have a Bogen Nano Clamp (or the Avenger Nano Clamp).
Where does the stud mount? I assume in the two little holes in the image below.

Also, how wide is the clamp?

This image is copyrighted by the owner

Thanks,
Michael

Nov 18, 2008 at 02:43 PM

Roland W
Offline
Upload & Sell: Off

p.1 #2 · Bogen Nano Clamp size?

The holes are threaded, one a 1/4" and the other a 3/8". Check the B&H web site under the specifications tab for further information.

And thanks for pointing these out to me. I did not know they existed, and will want to get a couple.

Nov 18, 2008 at 03:12 PM

henryp
Offline
Upload & Sell: Off

p.1 #3 · Bogen Nano Clamp size?

Roland W wrote: Check the B&H web site under the specifications tab for further information.

That'd be here

Henry Posner
B&H Photo-Video

Nov 18, 2008 at 05:47 PM

MichaelKirk
Offline
Upload & Sell: Off

p.1 #4 · Bogen Nano Clamp size?

henryp wrote:
Roland W wrote: Check the B&H web site under the specifications tab for further information.

That'd be here

Henry Posner
B&H Photo-Video

Henry,
Thanks for posting - always great to see BH show up here!
There is no info or measurements that I can find to say how wide this clamp is. Any chance you can take a measurement of this clamp? From the clamp handle side to the opposite side. 2",3",4"

Reason is, I thought the Super Clamp would work fine, but that clamp is too wide for my needs.

Nov 18, 2008 at 05:59 PM

jarchambault
Offline
Upload & Sell: On

p.1 #5 · Bogen Nano Clamp size?

All the way open it's about 3 1/4" and all the way closed (jaws touching) it's about 2 3/4"...all measured using the very scientific "hold a tape measure up next to it and eyeball it" method.

Nov 19, 2008 at 04:12 AM

Roy Pertchik
Offline
Dedicated FM
Upload & Sell: Off

p.1 #6 · Bogen Nano Clamp size?

I prefer these.... on one, I have a RRS small ball head and small lever clamp for a killer impromptu camera mount. I have 3 more w/ small Hama ball heads w/ cold shoe mounts for grab anywhere speed light placement.

http://www.filmtools.com/minorskinmin.html

Nov 20, 2008 at 01:20 AM

henryp
Offline
Upload & Sell: Off

p.1 #7 · Bogen Nano Clamp size?

MichaelKirk wrote:
There is no info or measurements that I can find to say how wide this clamp is. Any chance you can take a measurement of this clamp? From the clamp handle side to the opposite side. 2",3",4"

The dimension your image indicates is 2.5 inches. Other specs from the Bogen product insert:
clamp round barrels with diam from 13-35 mm
clamp surfaces from 3-21 mm
max load on the vert axis = 5.5 kg (12 lbs)

Henry Posner
B&H Photo-Video

Nov 20, 2008 at 06:56 PM

end
FM Forums \| General Gear-talk \| Join Upload & Sell end