Using Telephoto Lenses

FM Forum Rules
Canon SLRs, primes, and zooms lenses reviews

FM Forums \| Canon-mount SLRs \| Join Upload & Sell	Search Used
end

Archive 2007 · Using Telephoto Lenses

monsterdeer
Offline
Upload & Sell: On

p.1 #1 · Using Telephoto Lenses

I just got back from Jellystone and have a question concerning using Canon telephoto lenses (400 2.8 and 600). When I put these on the my camera (400D) the lenses won't focus until I monkey around with the lens "switches". Does any one know what "settings" I need to keep on these lenses so they focus immediately after I put them on my camera? Thanks, Steve

Edited by monsterdeer on Sep 20, 2007 at 04:38 PM GMT

Sep 20, 2007 at 09:11 PM

Gravitytoy
Offline
Upload & Sell: On

p.1 #2 · Using Telephoto Lenses

They all should auto focus straight away unless the focus switch is set to MF. Where'd you get that 600/2.8?... :-)

Sep 20, 2007 at 09:15 PM

Alan321
Offline
Dedicated FM
Upload & Sell: On

p.1 #3 · Using Telephoto Lenses

Those lenses have a distance limiter switch. I'm pretty sure that if the lens is already focused to a distance not within the range of the switch when you attach it to the camera then AF may not work. You'd need to manually shift the focus distance or change the distance limiter switch setting in order to get the lens focus within the AF range of the switch. Then AF will work fine. Maximum versatility is achievable when the switch is in the minimum distance to infinity position.

On the plus side, limiting the AF focus distance can speed up the AF by not letting the lens go searching for focus outside the required range.

The IS switch and the IS Mode switch will not disable AF operation.

- Alan

Sep 20, 2007 at 09:32 PM

darryn patch
Offline
Upload & Sell: Off

p.1 #4 · Using Telephoto Lenses

Did this happen once or all the time??

Cause it should work straight off the bat, even if your 600 was set to 0-15m and your subject was 50m away it should start to hunt for focus.

Sep 20, 2007 at 09:36 PM

monsterdeer
Offline
Upload & Sell: On

p.1 #5 · Using Telephoto Lenses

This focus issue happened alot when I changed lenses with the 600 and the 400. It always worked once I played with limiter switch, but it was a pain. This only occurred with the 600 and the 400--the 300 2.8 worked all the time. Got to be frustrating.

Sep 20, 2007 at 11:37 PM

EMC 2
Offline
Upload & Sell: Off

p.1 #6 · Using Telephoto Lenses

That's weird, I've never had that happen with any of my supertele's and/or SLR's.

Sep 20, 2007 at 11:53 PM

EOSMIKE
Offline
Account Locked

p.1 #7 · Using Telephoto Lenses

so, tell us more!

will the AF "hunt", or not move at all?
What is the subject, focus mode (AI servo?) on body and the lens, lighting situation (nighttime or daylight), and other shooting conditions.

what is the focus trigger, the shutter button 1/2 way, or the * button

if you try the wrong one, the lens will not focus!

Will these lenses focus on another body, but not yours

what have you tried

Sep 21, 2007 at 12:48 AM

monsterdeer
Offline
Upload & Sell: On

p.1 #8 · Using Telephoto Lenses

The AF just locked up and the red light or beep didn't turn on. Shot in shade alot--never too dark. Didn't have a second camera. Used a cable release and the actual button--tried everything. ISO 100-400. When I changed the switches it all began to work eventually. Strange.

After the lens began AF it never had a problem even in real low light (almost dark).

Sep 21, 2007 at 02:52 AM

Pixel Perfect
Offline
Dedicated FM
Upload & Sell: On

p.1 #9 · Using Telephoto Lenses

Maybe the contacts on the camera are dirty, give them a clean and on the lenses.

Sep 21, 2007 at 03:48 AM

Alistair Watson
Offline
Dedicated FM
Upload & Sell: Off

p.1 #10 · Using Telephoto Lenses

Took the words right out of my mouth Whayne!

Sure sounds like a weird issue, one I never experienced before.

Sep 21, 2007 at 07:27 AM


FM Forums \| Canon-mount SLRs \| Join Upload & Sell end