Kledi Andoni Offline Upload & Sell: Off
|
Yes, the wires I show in the picture should be soldered to the hotshoe connector of the 550ex. The new hotshoe connector shall be here in a couple of days, but practically I have no idea where I should solder each wire, and don't want to play with it as I dont want to damage the camera by some bad wiring.
I superglued this hotshoe case once, but when it broke for the second time, the hotshoe connector stayed on the camera and the flash fell cutting all the 6 wires to the hotshoe connector leaving me with no idea where each wire went.
http://www.pronet.com.al/kledi/broken-550ex-2.jpg
|