jjlphoto Offline Dedicated FM Upload & Sell: Off
|
p.6 #1 · Zeiss/Oly -> 5D Compatibility List | |
1Ds mirror shave info.
I use a Dremmel with the diamond blade #545. ($15). I also wear a dust mask, no one knows what the mirror is made of. Lift up the mirror about half way, and hold it there with some blobs of poster tack. (Some people call it blue tack). Take some wide painters/masking tape, and mask off the chamber opening. Make sure to pay special attention to where the tape fits around the mirror to get a good seal. The 1Ds needs both the mirror and metal frame shaved a bit. But not so far that when up it misses the foam pads under the focus screen. It still needs to land there when up. (I don't know what the 5D has for an up-position rest.) The Dremmel is held parallel to the camera body, and you slowly push the small grinding wheel ahead along the edge of the mirror taking off a tiny bit at a time. When done, use a sharpie to blacken out the cut. Then, hold camera upside down and use your Giottos rocket blower to get as much dust out of there as possible. Open and close the mirror a number of time to shake any debris off that as well, and keep using the rocket blower.
|