Home · Register · Software · Software · Join Upload & Sell

Moderated by: Fred Miranda
Username  

  New fredmiranda.com Mobile Site
  New Feature: SMS Notification alert
  New Feature: Buy & Sell Watchlist
  

FM Forums | Lighting & Studio Techniques | Join Upload & Sell

  

Jinbei Energon EN-350 + Profoto D1 = Question!!
  
 
manvin
Offline

Upload & Sell: Off
p.1 #1 · p.1 #1 · Jinbei Energon EN-350 + Profoto D1 = Question!!


I'd like to know if the Jinbei Energon EN-350 will work with Profoto D1 500w?

I know about Profoto BatPack, but they are far too expensive + too heavy for outdoor!



Jun 12, 2017 at 08:37 PM
kdphotography
Offline
• • •
Upload & Sell: On
p.1 #2 · p.1 #2 · Jinbei Energon EN-350 + Profoto D1 = Question!!


If the Jinbei EN-350 really is essentially the same output as the Buff Vagabond Mini Lithium---you should be able to use the Profoto D1, as long as it is set in Battery Mode.

ken



Jun 12, 2017 at 09:20 PM
manvin
Offline

Upload & Sell: Off
p.1 #3 · p.1 #3 · Jinbei Energon EN-350 + Profoto D1 = Question!!


I'm unable to find "Buff Vagabond Mini Lithium" within UK but look like this battery pack is from USA

Here is specification for both devices - are they compatible?

Jinbei Energon EN-350:

Continuous Output: 200W
Peak Power: 600W
Input Voltage Range: 11 - 15.5V
Output Voltage / Frequency: AC 210-230V /60Hz
USB output voltage/Current: DC5V/0.5A
Output Waveform: Pure Sine Wave
Nominal capacity of the battery: Li-polymer 14.8V 8800mAh
Fuse: 30A


Buff Vagabond Mini Lithium:

Battery: 14.8V 8.8AH LiNiMnCoO2 lithium battery (130 Watt-hours)
Inverter: 120VAC inverter with two standard, 3-prong 120VAC outlets

i guess UK contain 230v in electrical wall socket



Jun 12, 2017 at 10:25 PM
kdphotography
Offline
• • •
Upload & Sell: On
p.1 #4 · p.1 #4 · Jinbei Energon EN-350 + Profoto D1 = Question!!


Here's a comparison: http://flashhavoc.com/jinbei-en-350-energon/

You might need an adapter plug.

I know the VML works with the Profoto D1 in Battery mode. If the Jinbei is equivalent, it should work. But I'm not an electrician.



Jun 13, 2017 at 12:59 AM







FM Forums | Lighting & Studio Techniques | Join Upload & Sell

    
 

You are not logged in. Login or Register

Username     Reset password