Konablue Offline Upload & Sell: Off
|
| Available
Price: $775.00 Payment method: PayPal Item condition: 9 Shows signs of use, but very clean Shipping instructions: Will be double boxed for shipping. UPS, FEDEX or USPS are available
I'm the original owner and purchased this as a display unit directly from Profoto. It's in excellent condition, lightly used and just over a year old. There are some minor scuffs on the stainless steel ring which are typical on Profoto heads from attaching light modifiers. Can be used with a sync cable, IR slave, or controlled remotely from the camera with the Air Remote.
Includes Profoto D1 Air Monolight, Protective Cap, 10 Ft Power Cord and original packaging. Price has been lowered to $775. The new price of a D1 Air 500 is currently $1143.
General Specifications
Energy: 500 Ws
Energy range: 7 f-stops (7,8-500 Ws).
Energy control increments: 1/10 and full f-stops
Recycling Time 230V50Hz: 0,2-0,95s
Flash Duration t 0.5: 1/2600(max power), 1/1000 s(min power)
Modeling Lamps Total W/pack (max.): 300W
Modeling Light Modes: On, Off, Prop, Free
Energy control increments: 1/10 and full f-stops
Energy / Voltage Stability: +/-1/20 f-stop
Guide number @ 2m / 100 ISO with Magnum Reflector: 45 4/5
Specified Data Conditions: 120 or 230 V AC
Input power supply: 100-127V / 200-240V, 50/60Hz (nominal)
Syncronization and Control
Sync socket(s): 1
Wire sync voltage: Compliant to ISO 10330 standard
Wire sync connector: 3.5mm Mini-Phono
Photocell/IR-slave and switch: Yes
Miscellaneous
Digital Display: Yes, f-stops and Air channels/groups
Fan Cooled: Yes, temperature regulated
Automatic Multi-Voltage: Yes, 90-130V/180-240V, 50-60Hz incl. model light
Ready Signals: Yes, ready lamp, dim and/or switchable beep sound
Auto dumping: Yes
Fuse Requirement per unit at max. Speed Setting: Slow blow 6A/230V, 10A/120V
Automatic mains fuse type: C, D, E 6A/230V 10A/120V
Battery Operation: Yes, with optional Profoto BatPac
Measurements
Dimensions: 30x13x17 cm 11.8x5.12x6.7 inch
Weight: 2.43kg 5.36lbs |
|
Edited on Jan 21, 2016 at 12:46 PM · View previous versions
|