peterski Offline Upload & Sell: Off
|
kiernter wrote:
Thanks for the comments guys.
On the diffuser-- it is a concave diffuser based off of the design Orionmystery blogged about years ago. I have sto fen diffusers on the flash heads with diffusion paper placed inside the sto fens for good measure. Between them and the lens is a tent made up of some diffusion paper stapled between two sheets of packing material. The packing material is great because you can pull it back whenever you get in too close. I keep the tent it in place with gaffer tape on the sides. I jam the diffusers together as close as I can get them and point the heads straight down. Hope that helps (picture below).
Terrence
https://farm9.staticflickr.com/8310/7974397132_14b53d7368_z.jpg
Another rig picture... by kiernter, on Flickr...Show more →
Your diffusion photo goes a long way to explain how hard it is to diffuse those nasty little MT-24EX flash heads. Flash power versus size I reckon they win hands down. So well done on your result.
cheers,
peter
|