Home · Register · Search · View Winners · Software · Hosting · Software · Join Upload & Sell

Moderated by: Fred Miranda
Username   Password

  New fredmiranda.com Mobile Site
  New Feature: SMS Notification alert
  New Feature: Buy & Sell Watchlist
  

FM Forums | Lighting & Studio Techniques | Join Upload & Sell

1      
2
       end
  

Yongnuo YN622N and YN622TX
  
 
pr4photos
Offline
• • •
Upload & Sell: Off
p.2 #1 · Yongnuo YN622N and YN622TX


I use them in conjunction with the Yongnuo 568 flashes and they work perfectly. Have always used Yongnuo triggers and never had a failure. Brilliant, cost effective kit


May 02, 2014 at 04:21 PM
AFphotography
Offline

Upload & Sell: On
p.2 #2 · Yongnuo YN622N and YN622TX


I have this exact setup and it works flawlessly!



May 06, 2014 at 05:49 PM
jamesmorophoto
Offline
• • •
Upload & Sell: Off
p.2 #3 · Yongnuo YN622N and YN622TX


has anyone got the 622n-tx to super sync with any alien bees flash?

I have a b1600 that hyper syncs w/ pocket wizards, but won't work w/ the 622n tx.


Also, is there any info on how to fine-tune the timing? there's an option to auto-tune, then go from '.1-3', but no mention of what that actually does or any instructions on what settings work best.

I literally tried taking a shot and bumping the timing by .1 intervals, and it did nothing to solve the rear curtain sync problems.

I'm using a d800 on 1/320 (auto FP). also tried it on 1/250 (auto FP). made no difference.

I think the tt5 flex/tt1 mini software is what makes the 1/8000 sync possible.

the 622n-TX has no software, only an ability to make firmware updates IF you have a pc.



May 07, 2014 at 02:46 AM
pr4photos
Offline
• • •
Upload & Sell: Off
p.2 #4 · Yongnuo YN622N and YN622TX


I don't understand the fine tune either. I want to fine tune it to my Godox mono light, but there are no instructions on how to. I can HSS no problem, but fine tune


May 07, 2014 at 09:40 AM
jamesmorophoto
Offline
• • •
Upload & Sell: Off
p.2 #5 · Yongnuo YN622N and YN622TX


update: it's now syncing at 1/8000 with no curtain showing! not sure what I did. I'm using an ab1600.


May 14, 2014 at 02:58 AM
BrianO
Offline
• • • • •
Upload & Sell: On
p.2 #6 · Yongnuo YN622N and YN622TX


jamesmorophoto wrote:
update: it's now syncing at 1/8000 with no curtain showing! not sure what I did. I'm using an ab1600.


Did you change the output of the AB?



May 14, 2014 at 03:15 AM
jamesmorophoto
Offline
• • •
Upload & Sell: Off
p.2 #7 · Yongnuo YN622N and YN622TX


yep. it worked from full power down to the lowest setting.

really not sure what I changed on my camera. I have two d800's. One had red=eye reduction turned on and was screwing with my firing by introducing a 1 sec delay. so that may have been the problem.

It also may have been something as stupid as not switching the 622n-tx to SS mode (I had the SS timing set to auto).



May 15, 2014 at 02:49 AM
jeremy_clay
Online
• • • • • •
Upload & Sell: Off
p.2 #8 · Yongnuo YN622N and YN622TX


I use the Yongnuo;s all the time. 622C's synced up with a 5DIII and AB-1600. They sync my AB @ 1/8000 as well, for whatever reason.








May 16, 2014 at 03:52 PM
jamesmorophoto
Offline
• • •
Upload & Sell: Off
p.2 #9 · Yongnuo YN622N and YN622TX


Jeremy, check out my post on mounting the transceivers to alien bees. might come in handy.


May 17, 2014 at 07:01 AM
 

Search in Used Dept. 



jamesmorophoto
Offline
• • •
Upload & Sell: Off
p.2 #10 · Yongnuo YN622N and YN622TX


Did some tests w/ the yn-622n transceivers and the 622n-tx trigger.

a few observations:

super sync works on an einstein, but only at full power.

There are no hard curtain shadows, only graduated shadows.

1/8000 has a graduated loss of power from top to center (about 1/3rd of the frame).

There are varying levels of graduated power loss down to 1/640 (probably even loss).

Though it's pretty safe to say you can shoot at 1/1000 w/o it being a problem at all.

Indoors against a white backdrop, you'll notice it a lot sooner. But it should be repaired w/ a gradient mask for exposure.

major difference b/t the einstein and b1600 is that the b1600 can be used at all power levels w/o a hard curtain shadow.




May 17, 2014 at 07:27 PM
jeremy_clay
Online
• • • • • •
Upload & Sell: Off
p.2 #11 · Yongnuo YN622N and YN622TX


jamesmorophoto wrote:
Jeremy, check out my post on mounting the transceivers to alien bees. might come in handy.



I did see that, actually I had yet to velcro up my triggers in this photo. Had I not already done so, your solution is certainly better



May 20, 2014 at 02:06 PM
jamesmorophoto
Offline
• • •
Upload & Sell: Off
p.2 #12 · Yongnuo YN622N and YN622TX


where would you velcro them w/o covering buttons?


May 21, 2014 at 06:27 AM
jeremy_clay
Online
• • • • • •
Upload & Sell: Off
p.2 #13 · Yongnuo YN622N and YN622TX


It's on the underside of the trigger. Will have to take a pic but it's in my car currently


May 21, 2014 at 01:42 PM
Allynb
Offline
• • •
Upload & Sell: Off
p.2 #14 · Yongnuo YN622N and YN622TX


Does Yongnuo have a 622-TX for Canon, yet?


May 30, 2014 at 10:38 PM
BrianO
Offline
• • • • •
Upload & Sell: On
p.2 #15 · Yongnuo YN622N and YN622TX


Allynb wrote:
Does Yongnuo have a 622-TX for Canon, yet?


Are they even planning one? A separate controller is needed for Nikons because they don't have flash control menus in their bodies. With current Canon bodies you don't need an external control box.



May 31, 2014 at 02:21 AM
SeedyBee
Offline

Upload & Sell: Off
p.2 #16 · Yongnuo YN622N and YN622TX


Allynb wrote:
Does Yongnuo have a 622-TX for Canon, yet?

Not yet. They were ramping up for production in May, but have run into a problem. Latest that I have seen is in YN's Facebook page - before October 2014 providing all goes well.

I have been using an engineering sample for some weeks. It will certainly extend functionality and ease-of-use for Canon users of the 622C.

P.S. Look for the release v.4 of TOYUG pdf, at
https://docs.google.com/open?id=0B77OmmGIg0gMVFpqNkpBYXBHajA



May 31, 2014 at 02:54 AM
SeedyBee
Offline

Upload & Sell: Off
p.2 #17 · Yongnuo YN622N and YN622TX


TOYUG v3.5


May 31, 2014 at 03:01 AM
Allynb
Offline
• • •
Upload & Sell: Off
p.2 #18 · Yongnuo YN622N and YN622TX


Thanks for the update Seedybee
Allan



Jun 03, 2014 at 02:47 AM
1      
2
       end




FM Forums | Lighting & Studio Techniques | Join Upload & Sell

1      
2
       end
    
 

You are not logged in. Login or Register

Username   Password    Retrive password