Home · Register · Search · View Winners · Software · Hosting · Software · Join Upload & Sell

Moderated by: Fred Miranda
Username   Password

  New fredmiranda.com Mobile Site
  New Feature: SMS Notification alert
  New Feature: Buy & Sell Watchlist
  

FM Forums | Canon Forum | Join Upload & Sell

  

Archive 2012 · 200mm 1.8L Hood Parts
  
 
pookipichu
Online
• • •
Upload & Sell: Off
p.1 #1 · 200mm 1.8L Hood Parts


Does anyone know where I can buy screws for the 200mm 1.8L hood? One of the two small screws holding the locking mechanism became loose and fell out. I appreciate any information anyone might have.


Nov 13, 2012 at 02:49 AM
clarence3
Offline
• • • •
Upload & Sell: Off
p.1 #2 · 200mm 1.8L Hood Parts


Funny, I've been looking for one too.

I've got the part number, there's actually 2 different sized screws used in the 200/1.8 hood. But I couldn't find a source. Lots of generic options on ebay.

I'm on the road, so I don't have my notes, but this weekend I'll post the closest possible options that I've found so far. But if anyone comes up with an OEM replacement, I'd be thrilled.



Nov 13, 2012 at 03:47 AM
saneproduction
Offline
• • •
Upload & Sell: Off
p.1 #3 · 200mm 1.8L Hood Parts


I just wish mine had a hood at all... Big complainers


Nov 13, 2012 at 05:21 AM
dolina
Offline
• • • •
Upload & Sell: Off
p.1 #4 · 200mm 1.8L Hood Parts


saneproduction wrote:
I just wish mine had a hood at all... Big complainers


They sell replacements made from aluminum.

http://www.limsmall.com/sah-oe123c1-aluminium-lens-hood-for-canon-200mm-f1.8-lens.html








Nov 13, 2012 at 06:23 AM
pookipichu
Online
• • •
Upload & Sell: Off
p.1 #5 · 200mm 1.8L Hood Parts


dolina wrote:
They sell replacements made from aluminum.

http://www.limsmall.com/sah-oe123c1-aluminium-lens-hood-for-canon-200mm-f1.8-lens.html



Hopefully I can find a screw that costs less than $289



Nov 13, 2012 at 05:04 PM
 

Search in Used Dept. 



BobnJake
Offline
• • •
Upload & Sell: On
p.1 #6 · 200mm 1.8L Hood Parts


Try Mid State Camera

401-467-7390

Bob



Nov 13, 2012 at 05:10 PM
cogard
Offline
• • • •
Upload & Sell: On
p.1 #7 · 200mm 1.8L Hood Parts


I had the 300 years ago and lost a couple and called Canon they sent me a couple at no charge...I wonder ie the 200 2.0 would be the same size?

Charlie O.



Nov 14, 2012 at 01:15 AM
RDDave
Offline

Upload & Sell: Off
p.1 #8 · 200mm 1.8L Hood Parts


If you have a local hobby shop that sells radio control planes/cars etc. go and visit to see what they have in the way of screws. The two sizes are 2mm and 2.6mm about 6mm long. I swapped all of the screws in the 4 locating lugs to socket head screws which are not quite as pretty but they are functional and feel like they are tight now.

The two lugs either side of locating screw have a 2mm thread, the other two are 2.6mm thread. By the looks of it the screws in the bottom of hood locking assembly are 2mm and there should be room for a socket head screw in there.

I screws I used were Du-Bro 2mm x 6mm, part number 2112 and the 2.6mm were HPI Racing part number Z421 2.6mm x 8mm which I cut down to length.

Hope this help you

Dave



Nov 23, 2012 at 03:33 AM
GoGo
Offline
• • •
Upload & Sell: On
p.1 #9 · 200mm 1.8L Hood Parts


Call Canon Parts In Jamestown NJ, they have all of the OEM parts for the lens hood.


Nov 23, 2012 at 01:37 PM





FM Forums | Canon Forum | Join Upload & Sell

    
 

You are not logged in. Login or Register

Username   Password    Retrive password