Epson 3800

Home · Register · Search · Software · Hosting · Software · Join Upload & Sell

Moderated by: Hendrik, Fred Miranda

Pre-order new Rokinon 16mm f/2.0 ED AS UMC lens

Pre-order new Sigma 18-35mm f/1.8 DC HSM lens

Bower 35mm f/1.4 price dropped to $379

FM Forums \| Post-processing & Printing \| Join Upload & Sell
end

Epson 3800

Drpr
Offline
•
Upload & Sell: On

p.1 #1 · Epson 3800

Darkest shadows (black) have started printing silver. Just updated drivers for OS 10.8.1. Tried printing through LR 4 and CS6 with same results.

Any suggestions?

PRJ

Sep 01, 2012 at 07:53 PM

JohnBrose
Offline
• • •
Upload & Sell: On

p.1 #2 · Epson 3800

Did you do a nozel/head check? I'm assuming you mean light grey unless you are using metellic inks?

Sep 01, 2012 at 07:58 PM

Drpr
Offline
•
Upload & Sell: On

p.1 #3 · Epson 3800

Nozel/head ck, head cleaning also. Still stumped!

Sep 01, 2012 at 08:19 PM

Drpr
Offline
•
Upload & Sell: On

p.1 #4 · Epson 3800

Nozel/head ck, head cleaning also. Still stumped!

Sep 01, 2012 at 08:19 PM

howardm4
Offline
• • • •
Upload & Sell: Off

p.1 #5 · Epson 3800

you may want to try deleting and re-instantiating the printer. If that doesn't work, then perhaps a full reset of the printing system (which nukes all known printers) (hold OPTION down while pressing the '-' key in the Printer Pref (as though you were about to delete a printer).

Sep 01, 2012 at 10:02 PM

Drpr
Offline
•
Upload & Sell: On

p.1 #6 · Epson 3800

Have deleted and re-instated the printer. Will try a full reset next.

Thanks, and hope this gets me back up and running.

Sep 02, 2012 at 01:44 AM

colinm
Offline
• • •
Upload & Sell: Off

p.1 #7 · Epson 3800

Which paper?

Sep 02, 2012 at 02:26 AM

Drpr
Offline
•
Upload & Sell: On

p.1 #8 · Epson 3800

Good Morning! Did a full reset, still printing gray.

This is on premium glossy and luster paper, no difference.

Sep 02, 2012 at 03:27 PM

Drpr
Offline
•
Upload & Sell: On

p.1 #9 · Epson 3800

OK, brain check. Did not count the colors on the nozzle check, have a clogged nozzle.

Thank you for your time, will do a better job of checking my checks next time, have had this one for years, you would think that I just started with it.

Again, my apologies for taking up your time.

PRJ

Sep 04, 2012 at 01:37 PM

end
FM Forums \| Post-processing & Printing \| Join Upload & Sell end