Home · Register · Join Upload & Sell

Moderated by: Fred Miranda
Username  

  New fredmiranda.com Mobile Site
  New Feature: SMS Notification alert
  New Feature: Buy & Sell Watchlist
  

FM Forums | Leica & Alternative Gear | Join Upload & Sell

1       2       3              7      
8
       9              19       20       end
  

Archive 2012 · lens repair, modification and disassembly guide thread

  
 
Edgars Kalnins
Offline
• • •
Upload & Sell: Off
p.8 #1 · p.8 #1 · lens repair, modification and disassembly guide thread


In the previous page I posted some samples with sonnar, here are two simple pictures with Tessar 35mm f3.5


Tessar 35mm f3.5 from Yashica T5 by lowlightlove, on Flickr


Tessar 35mm f3.5 from Yashica T5 by lowlightlove, on Flickr



Jul 03, 2013 at 07:09 PM
ZoneV
Offline
• • •
Upload & Sell: Off
p.8 #2 · p.8 #2 · lens repair, modification and disassembly guide thread


For my experiments with flares I used UV filters, sometimes 5 stacked filter, but one big filter hand held in front of the lens worked better.
But I thought about removing lens coating as a better way. Furthermore this could be good for infrared and ultraviolet photography too.

I searched what people wrote about coating removal, but found most times chemical based ideas (Armour Etch and hydrofluoric acid for example). So I searched more for polishing agents, and found and bought several polishing abrasives.

For a first fast test I used this on a complete lens - for front
lens scratch repair - worked fine:

http://www.4photos.de/camera-diy/Photo-Lens-Scratch-Repair-.jpg


After this I disassembled a Helios 44 lens and uncoated this lens:

http://www.4photos.de/camera-diy/Lens-Cotating-Removed-.jpg


This works fine, I plan to do some further improvements - for example a cheap wide-angle lens, or probably even a zoom lens (those bad ones like 28-80 or such) for more of the effect:

http://www.4photos.de/camera-diy/Classic-Lens-Look-1024.jpg




Jul 21, 2013 at 04:05 AM
mMontag
Offline
• • • •
Upload & Sell: Off
p.8 #3 · p.8 #3 · lens repair, modification and disassembly guide thread


Markus - yeah, dig-it - nice use of that lens for that image!

I have some 50+ year old lenses that are mildly single coated - I've always wondered what a non-coated lens could render - I'll have to try this though I have a few other mods to do first.

The more you "play" with it the more you'll learn how to render with such a tool.....exploiting the aberrations.....

Thanks for posting!



Jul 21, 2013 at 12:09 PM
triplelatte
Offline

Upload & Sell: Off
p.8 #4 · p.8 #4 · lens repair, modification and disassembly guide thread


For anyone interested in Sebboh‘s G28 conversion, I have had some Solidworks and Catia design files made based on measurements Derek kindly provided.

I have printed the rings with a 3d printer and can confirm that the measurements are correct (although I still have to drill the mounting holes on the M adapter I got, and adjust for infinity).

If anyone has access to a CNC machine or connections to have these made cheaply in aluminum, I would be happy to buy a set..

https://dl.dropboxusercontent.com/u/24112177/FRONT_RING.zip
https://dl.dropboxusercontent.com/u/24112177/REAR_RING.zip



Jul 24, 2013 at 12:20 AM
dkerins
Offline

Upload & Sell: Off
p.8 #5 · p.8 #5 · lens repair, modification and disassembly guide thread


Using the specs, I got a quote from a local firm for CNC machining.

It is not cheap for a one off but goes below $100 per adapter ring with quantities of 5 each. Any one interested?

P.S. Any opinions about the cost competitiveness of this machinist?

http://farm4.staticflickr.com/3771/9413781117_b2d6a9c341_b.jpg

triplelatte wrote:
If anyone has access to a CNC machine or connections to have these made cheaply in aluminum, I would be happy to buy a set..



Aug 01, 2013 at 09:23 AM
Commonbeing
Offline

Upload & Sell: Off
p.8 #6 · p.8 #6 · lens repair, modification and disassembly guide thread



Commonbeing says:

I am busy cleaning my Olympus OM 50mm Zuiko MC 1.4 lens, but I am struggling to open up the front set of lenses, I have taken the front set out, but the inner ring that holds the set together won't budge. It does not have any cuts for a tool and I'm beginning to think it is glued in or something.

Does anyone have any ideas as to how to unscrew it? I have tried using a ring of the same diameter with double sided tape on the edge.

Some pictures of the ring/lenshttp://www.flickr.com/photos/99880435@N06/



Aug 05, 2013 at 11:58 AM
sebboh
Offline
• • • • • •
Upload & Sell: Off
p.8 #7 · p.8 #7 · lens repair, modification and disassembly guide thread


Commonbeing wrote:

Commonbeing says:

I am busy cleaning my Olympus OM 50mm Zuiko MC 1.4 lens, but I am struggling to open up the front set of lenses, I have taken the front set out, but the inner ring that holds the set together won't budge. It does not have any cuts for a tool and I'm beginning to think it is glued in or something.

Does anyone have any ideas as to how to unscrew it? I have tried using a ring of the same diameter with double sided tape on the edge.

Some pictures of the ring/lenshttp://www.flickr.com/photos/99880435@N06/


no experience with that particular lens, but it looks like the sort of ring that a rubber ring would work well on. in my experience such rings work well even if the manufacturer used a bit of glue to secure it. unfortunately if the threads are rusty they don't seem to be much help. i have a swamped canon FL 55/1.2 that i can't seem to open either.





Aug 06, 2013 at 04:01 AM
ZoneV
Offline
• • •
Upload & Sell: Off
p.8 #8 · p.8 #8 · lens repair, modification and disassembly guide thread


I think it depends on how much of the glue is between the threads of ring and housing. I have some optical assemblies I could not open, front cell of a tokina 60-300 and some of my macro teleconverter lenses. Interessting part here some others from the same brand could be opened. Not sure wheter I tried to heat them a bit to get the glue softer (dangerous cause lens could break or get delaminated).


Aug 06, 2013 at 10:29 AM
triplelatte
Offline

Upload & Sell: Off
p.8 #9 · p.8 #9 · lens repair, modification and disassembly guide thread


What you found was pretty much the same as what I was quoted at some local shops for the rings.

I found a Chinese CNC shop that did small orders, and have a set of 5 each on their way now. Cost was much less than what I was quoted by anyone here in the States. They should be here in a few days -- I'll check measurements and quality when they arrive..

If they are good I'll put the remainder out for sale here. Should be on the lines of $50/pair if it works out.



dkerins wrote:
Using the specs, I got a quote from a local firm for CNC machining.

It is not cheap for a one off but goes below $100 per adapter ring with quantities of 5 each. Any one interested?

P.S. Any opinions about the cost competitiveness of this machinist?





Aug 06, 2013 at 05:43 PM
alundeb
Offline
• • • • •
Upload & Sell: Off
p.8 #10 · p.8 #10 · lens repair, modification and disassembly guide thread


Just stumbled across this extensive list of DIY references:

http://www.4photos.de/camera-diy/index-en.html



Aug 07, 2013 at 03:52 AM
alundeb
Offline
• • • • •
Upload & Sell: Off
p.8 #11 · p.8 #11 · lens repair, modification and disassembly guide thread


If anybody knows how to adjust/tighten the front barrel on the C/Y 35-70 it would be much appreciated.

https://www.fredmiranda.com/forum/topic/1161928/0



Aug 07, 2013 at 03:57 AM
triplelatte
Offline

Upload & Sell: Off
p.8 #12 · p.8 #12 · lens repair, modification and disassembly guide thread


Good news on the aluminum rings I had made in China for the G28 conversion. The dimensions are spot on and the holes all line up properly -- I did have to thread the holes myself as they forgot to do that part of the process -- but all in all it works; everything went together nicely and I'm hitting infinity focus. I still have some slight adjustments to make on the focusing and aperture linkage, but I'm happy with where its at right now.

I have three sets of the rings remaining -- pm if interested.

http://farm8.staticflickr.com/7342/9522664238_5db212d98e_c_d.jpg

Edited on Aug 16, 2013 at 02:22 AM · View previous versions



Aug 16, 2013 at 02:06 AM
sebboh
Offline
• • • • • •
Upload & Sell: Off
p.8 #13 · p.8 #13 · lens repair, modification and disassembly guide thread


triplelatte wrote:
Good news on the aluminum rings I had made in China for the G28 conversion. The dimensions are spot on and the holes all line up properly -- I did have to thread the holes myself as they forgot to do that part of the process -- but all in all it works; everything went together nicely and I'm hitting infinity focus. I still have some slight adjustments to make on the focusing and aperture linkage, but I'm happy with where its at right now.

I have three sets of the rings remaining -- pm if interested.



excellent! how much did you need to adjust the infinity stop with those measurements out of curiousity? also, can you post a pic of the finished lens?





Aug 16, 2013 at 02:19 AM
triplelatte
Offline

Upload & Sell: Off
p.8 #14 · p.8 #14 · lens repair, modification and disassembly guide thread


I got pretty close to using up all of the available adjustment room to get it to infinity. I'll post a few more pics later on..


Aug 16, 2013 at 02:30 AM
triplelatte
Offline

Upload & Sell: Off
p.8 #15 · p.8 #15 · lens repair, modification and disassembly guide thread


Here are some pics of the final G28/Rokkor conversion using the rings I had made, along with a side by side comparison with the W.Rokkor 28 2.8.


http://farm8.staticflickr.com/7314/9534592812_b719921201_b.jpg


http://farm4.staticflickr.com/3806/9534595132_163917eb9c_b.jpg


http://farm6.staticflickr.com/5453/9534593804_9487cf78ea_b.jpg


http://farm8.staticflickr.com/7427/9531813885_dac53daf6a_b.jpg



Aug 17, 2013 at 06:35 PM
sebboh
Offline
• • • • • •
Upload & Sell: Off
p.8 #16 · p.8 #16 · lens repair, modification and disassembly guide thread


triplelatte wrote:
I got pretty close to using up all of the available adjustment room to get it to infinity. I'll post a few more pics later on..


looks good! glad to hear my measurements were accurate enough, mine uses pretty much all the available adjustment to reach infinity as well. out of curiosity, did you ask if it was possible to have the pieces made of chromed brass or have them anodized?




Aug 17, 2013 at 06:43 PM
triplelatte
Offline

Upload & Sell: Off
p.8 #17 · p.8 #17 · lens repair, modification and disassembly guide thread


sebboh wrote:
out of curiosity, did you ask if it was possible to have the pieces made of chromed brass or have them anodized?



They would have anodized them, but there would have been a significant delay since the shop I used would have to send them to a second factory to do the anodizing. I think it would have run a couple dollar more per ring, and I recall they wanted a bigger order to do it. In the end I decided not to do anything extra until I was sure the rings were of good quality and fit properly.

I didn't ask about chrome plated brass, but I did see on their materials list that brass was an option.



Aug 18, 2013 at 01:57 AM
LightShow
Offline
• • • • •
Upload & Sell: Off
p.8 #18 · p.8 #18 · lens repair, modification and disassembly guide thread


This may be usable for someone.
http://www.surplusshed.com/pages/item/m2607.html

MOUNTED WOLLENSAK IRIS ASSEMBLY F/2.5 TO F/16
http://www.surplusshed.com/images/items/M2607_2.jpg

There are lots of lens elements and groups etc for tinkerers, just have to browse.
This is where I found raw Canadian balsam to cement elements.
http://www.surplusshed.com/pages/item/b1077.html
Also have liquid version for slides, don't know if its good for optics.
http://www.surplusshed.com/pages/item/m3386.html



Aug 19, 2013 at 07:30 PM
sebboh
Offline
• • • • • •
Upload & Sell: Off
p.8 #19 · p.8 #19 · lens repair, modification and disassembly guide thread


for those interested in a converted contax g 45/2, i believe that one of them is available on the auction site from the member who gave me the idea that it was possible (m-a-x).

it's smaller than my conversion and focuses closer (though it's also fuji x-mount rather than m-mount).




Aug 29, 2013 at 12:51 AM
dkerins
Offline

Upload & Sell: Off
p.8 #20 · p.8 #20 · lens repair, modification and disassembly guide thread


Thanks to triplelatte for the aluminum adapter rings and sebboh for the guidance, I have brought a new FrankenZeiss to life. I used a ribbon of tin from a coke can to make the aperture control on the lens body connect to the aperture ring. Seems to work well.

I found if the back aluminum adapter ring is tightened too much against the aperture ring that the aperture ring binds. Anyone else experience that? If they are lightly tight then is it fine.

I am keen to do my G45 now but need to get the one (or is it two) aluminum rings from somewhere (someone). Anyone have a lead for me to get them?

http://farm4.staticflickr.com/3823/10392427014_d98a3d1a4f_b.jpg

http://farm6.staticflickr.com/5527/10392478376_362866eb8b_b.jpg

http://farm4.staticflickr.com/3678/10392564826_0005fe10df_b.jpg

http://farm4.staticflickr.com/3734/10392568605_799f5b1dc1_b.jpg




Oct 20, 2013 at 07:12 PM
1       2       3              7      
8
       9              19       20       end




FM Forums | Leica & Alternative Gear | Join Upload & Sell

1       2       3              7      
8
       9              19       20       end
    
 

You are not logged in. Login or Register

Username       Or Reset password



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.