Rotating Banners

Kickstarter: Peak Design Newly Redesigned Capture Clip, Slide, Slide Lite Straps



Our great friends over at Peak Design has just launched their 7th Kickstarter campaign. They're launching totally revamped versions of their greatest hits: Capture, Slide, and Slide Lite. These products took Peak Design off the ground, and now they've updated them to new levels of performance and aesthetics.


The new Capture Clip V3 is now 20% narrower, 30% lighter, 20% thinner and 6x smoother. It now comes in black and silver and is machined and anodized. It also has a non-slip grip on the inside and fits straps up to 2.5 inches. You still have the standard thumbscrew to tighten the Capture or you can go with a slightly more secure solution with hex bolt screws. Since it is smaller and lighter, it is a lot more comfier.


For the Slide and Slide Lite straps, it features new angled anchors that were introduced with the 2017 Leash and Cuff redesign. The new anchors are 2x thinner, fits more eyelets and works with tripod plates. The new straps also includes the ultra thin anchor mounts that attaches to the bottom of your camera if you don't have any tripod plates.

The webbing is smoother but offers better grip on the padding. Speaking of padding, it features new internal padding to offer more cushion and the strap has a lower profile.


The new ProPad is slimmer and more comfier and the Capture plates have also been slightly redesigned.

These are the retail prices once it is full available. Back through Kickstarter and there will be a slight discount. Act fast because this is only available for 5 DAYS!
  • Capture V3 with plate - $69.95
  • Capture V3 Clip only - $49.95
  • Slide - $64.95
  • Slide Lite - $49.95
  • ProPad V2 - $19.95
  • Standard Plate - $19.95
  • Dual Plate - $24.95
  • Bolt Pack - $9.95
Continue reading for full descriptions of each Peak Design product:

CAPTURE CLIP V3 - 2017 RELAUNCH
The all-new Capture is the most secure, convenient, accessible way to carry your camera, period. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly accessible with the click of a button. The Capture system includes 2 components: a metal clip that clamps to any backpack strap, belt, or bag, and a tripod-compatible plate that screws into the bottom of your camera. Your camera smoothly locks into the clip, where it is held rigidly and securely. Press the lockable quick-release button to remove.

The new 3rd gen Capture is smaller, lighter, and smoother than ever before. All machined/anodized aluminum construction. Metal quick-release button and locking mechanism holds well over 90 kg (200 lbs). Beautiful new ultra-smooth finish enhances durability, and ultra-low profile design increases comfort.

New/Improved Features
  • All aluminum build, including quick-release button and locking pin
  • All machined/anodized finish for increased durability and smoothness
  • Smaller and lighter for significantly upgraded comfort
    • 30% lighter
    • 20% narrower
    • 20% lower profile
  • Embedded grip in backplate for maximum slip resistance
  • Contains 2 sets of clamping bolts
    • Thumb-drive bolts for easy clamping and unclamping
    • Hex-drive bolts for more secure/permanent installation or thicker straps
  • Available in black and silver
Additional Features
  • Works with any size camera, including heaviest of pro setups
  • Connects to any strap up to 6.4 cm (2.5”) wide and 1.5 cm (0.6”) thick
  • Carry binoculars, lenses, and GoPro cameras with additional plates/kits (sold separately)
  • Instantly access camera with quick release button
  • Redundant security lock prevents accidental release
  • Includes Standard Plate, which works with most Arca-type tripods
  • Camera locks into clip in 4 directions, enabling easier lens changes
  • All parts are weatherproof and resist rust and saltwater
  • Clip is backwards compatible with all Peak Design plates
  • Standard Plate is not backwards compatible with older Capture models
--------

SLIDE STRAP - 2017 RELAUNCH
The most versatile pro camera strap in the world, the newly upgraded Slide can be worn as a sling, neck, or shoulder strap. Internally-padded nylon webbing has a smooth side that glides over clothing in sling mode and a grippy side that prevents slipping in shoulder mode. Dual quick-adjusters provide instant access and easy reconfiguration. Unique Anchor Link system connects quickly and dual points of connection keep your camera more stable than traditional sling straps. Plus, Anchors work with any Peak Design or 3rd party tripod plate.

Updates include a revamped silicone grip, upgraded webbing, lower profile strap/hardware transitions, and crease-free internal padding. Anchor connectors have been updated to be smaller, faster, and more secure.

New/Improved Features
  • Anchor connectors revamped - more secure, fast, and lower profile than ever
    • New canted/angled Anchors for effortless 1-handed connection
    • New thin Anchor cords fit through more camera strap loops/eyelets
    • 25% slimmer Anchor housing hardware
    • Anchors still hold 200+ lbs (90+kg)
    • Anchors work with any Peak Design or 3rd party tripod plate
  • New low-profile Anchor Mount for varying your strap configuration
  • New ultra-smooth nylon webbing with tighter, more durable weave
  • Upgraded silicone grip is more effective and durable
  • Strap molded directly into adjustment hardware for significantly lower-profile design
Additional Features
  • Wearable as sling, neck, or shoulder strap
  • Internally-padded webbing gives all-day comfort with no added bulk
  • Highly stable camera carry via 2 configurable points of connection
  • Works with heaviest of pro cameras, binoculars
  • Huge range of length adjustment
  • Webbing glides over clothing for quick camera access
  • Connects to strap loops or bottom of camera body via Anchor Mount hardware
--------

SLIDE LITE STRAP - 2017 RELAUNCH

The newly updated Slide Lite packs the unrivaled versatility of Slide into a smaller package, perfectly suited for mirrorless and light DSLR cameras. Wear Slide Lite as a sling, neck, or shoulder strap. Seatbelt-style nylon webbing has a smooth side that glides over clothing in sling mode and a grippy side that prevents slipping in shoulder mode. Dual quick-adjusters provide instant access and easy reconfiguration. Unique Anchor Link system connects quickly and dual points of connection keep your camera more stable than traditional sling straps. Plus, Anchors work with any Peak Design or 3rd party tripod plate.

Updates include a revamped silicone grip, upgraded webbing, lower profile strap/hardware transitions, and non-slip quick-adjusters. Anchor connectors have been updated to be smaller, faster, and more secure.

New/Improved Features
  • Anchor connectors revamped - more secure, fast, and lower profile than ever
    • New canted/angled Anchors for effortless 1-handed connection
    • New thin Anchor cords fit through more camera strap loops/eyelets
    • 25% slimmer Anchor housing hardware
    • Anchors still hold 200+ lbs (90+kg)
    • Anchors work with any Peak Design or 3rd party tripod plate
  • New low-profile Anchor Mount for varying your strap configuration
  • New ultra-smooth nylon webbing with tighter, more durable weave
  • Upgraded silicone grip is more effective and durable
  • Strap molded directly into adjustment hardware for significantly lower-profile design
Additional Features
  • Wearable as sling, neck, or shoulder strap
  • Highly stable camera carry via 2 configurable points of connection
  • Works with all cameras, binoculars
  • Huge range of length adjustment
  • Webbing glides over clothing for quick camera access
  • Connects to strap loops or bottom of camera body via Anchor Mount hardware
--------

PROPAD V2
Drastically increase your comfort and stability when using Capture with even the heaviest of camera/lens/grip combinations. Works on the belt or backpack strap. When on the belt, Pro Pad enables top-loading Capture entry. The all-new Pro Pad is significantly smaller and slimmer than the original version, yet built from a semi-rigid high-density EVA that provides more stability than ever. The pad is seamlessly laminated with our weatherproof charcoal nylon canvas, giving it a complete aesthetic makeover. And, in response to Pro Pad v1 customer feedback, we’ve made the new Pro Pad even easier to setup and use.

New/Improved
  • Significantly smaller and slimmer than v1
  • Seamless laminate construction is ultra low-profile
  • Hassle-free setup
Additional Features
  • Drastically increases comfort and stability with heavy cameras
  • Works on belt or backpack strap
  • Enables top-loading Capture access on belt
  • Backwards compatible with all versions of Capture
--------

STANDARD PLATE
Standard Plate is the camera plate that comes with Capture. It works with most ARCA-type tripods, fits in Capture in 4 directions, and contains 4 loops for connecting Peak Design Anchors. Newly upgraded with a durable machined/anodized construction and a 50% lower profile design. New connection screw slot allows more positioning options, preventing interference with lenses, screens, and battery compartments.

Features
  • 4-way Capture compatibility
  • New machined/anodized aluminum construction
  • 50% thinner, yet still fits most Arca-type tripods
  • Durable twist-resistant pad provides superior grip for heaviest of pro rigs
  • Connection screw slot allows you to position plate to avoid interference with lenses, screens, and battery compartments
  • 4 loops for connecting Peak Design Anchors
  • Fits any camera with a standard 1/4”-20 tripod mount
--------

DUAL PLATE
Dual Plate lets you remove your Camera from Capture (sold separately) and stick it directly into most Manfrotto® RC2 tripod heads. Dual Plate earn its name because it also works in most Arca-type tripod heads. Fits in Capture in 2 directions and contains 4 loops for Peak Design Anchors. Durable machined/anodized construction 2-way Capture compatibility. New connection screw slot allows more positioning options, preventing interference with lenses, screens, and battery compartments.

Features
  • 2-way Capture compatibility
  • Fits in most Manfrotto® RC2 tripod heads
  • Fits in most Arca-type tripod heads
  • Machined/anodized aluminum construction
  • Durable twist-resistant pad provides superior grip for heaviest of pro rigs
  • Connection screw slot allows you to position plate to avoid interference with lenses, screens, and battery compartments
  • 4 loops for connecting Peak Design Anchors
  • Fits any camera with a standard 1/4”-20 tripod mount
--------

BOLT PACK
Bolt Pack contains 2 replacement sets of clamping bolts for Capture: one pair of thumb-drive bolts which clamp to any strap up to 1.5 cm (0.6”) thick and one pair of hex-drive bolts which clamp to any strap up to 1.6 cm (0.7”) thick.

Features
  • Machined/anodized aluminum heads
  • Stainless steel shafts
  • Thumb-drive bolts for easy clamping and unclamping
  • Hex-drive bolts for more secure/permanent installation or thicker straps


Related Posts Plugin for WordPress, Blogger...